Welcome

My very own leaptop hack

My very own leaptop hack

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Rampant utilization of Flash means tablet is not hard to hack.Do I need to connect personal Leaptop to the computer to use it? – leapfrog

 

Aug 13, �� Turn My Own Leaptop off. Next, hold along the “P” and “M” buttons while picking one of the two volumes. Then proceed with the directions provided by My Own Leaptop. May 24, �� It’s almost like they no longer support the my very own Leaptop. It’s 7 yrs old. 05/26/ by Evan Ryan. I simply spoke to client service. They discontinued assistance for this product in April so that you missed it by one month. I suppose we are able to throw it in the heap with this older iphones since we’re basically having to get a brand-new product. Mar 10, �� Children-Friendly LeapFrog Tablet Is Also Hacker-Friendly. LeapPad ULTRA pills from LeapFrog are using obsolete Flash versions and insecure .

 

My own leaptop hack.Leapfrog My Own Leaptop Troubleshooting – iFixit

Mar 10, �� Children-Friendly LeapFrog Tablet Is Also Hacker-Friendly. LeapPad ULTRA pills from LeapFrog are employing obsolete Flash variations and insecure . BEFORE you plug in the USB cable: Go to and install the [email protected] Connect Application for MY VERY OWN LEAPT OP. Proceed with the installation tips to setup your child’s Leaptop. Turn the Leaptop model on. Connect the Leaptop to your personal computer because of the . Aug 13, �� Turn My Own Leaptop down. Next, hold along the “P” and “M” buttons while selecting one of the two volumes. Then follow the directions written by My Own Leaptop.
 
 
related:
MODERATORS
Sound no longer working
Leapfrog Connect OLD MODELS : abandonware
Why will not my computer see this device?
Buttons Don’t React
How to access USB mass storage on a my personal Leaptop () : OpenLF

My children have one for the old My Own Leaptop toys from that hook up to the pc via USB, and so they positively love how it states and spells their particular title. My boy has outgrown it and i needed to change the customization to my girl’s name, therefore I went along to make use of the Leaptop Connect, nonetheless it turns out Leapfrog has discontinued assistance because of this design.

Making use of an older form of their Leapfrog Connect as explained in this article , I was able to get the majority of the way there, and the doll now shows her name on the screen and reveals the custom e-mails I set up. However, my problem is that when the model tries to speak her title, it’s changed with a brief rush of static, such as “Hi [bzzzt], let us play collectively!

For me it appears as though the toy just features a corrupted audio file where her title must certanly be. It stands to reason why if I could access the filesystem from the product, I could change this file with certainly one of my own choosing. I will be able to install the most suitable sound from Leapfrog’s website, therefore I have an excellent content of the sound file that should be around.

Does anybody have experience accessing the filesystem of my very own Leaptop? Nonetheless, its disk shows as Not Initialized in Disk Management. I’m unsure the direction to go from here and wishing that somebody from this sub gets the expertise to point myself when you look at the correct path. I uploaded some screenshots of this issue and a copy associated with the Leapfrog Connect pc software only at that Dropbox link.

If anyone is so type to greatly help me out, I would really be thankful, so would my daughter when she hears the toy talk her name. It’s probably something I could determine, but i actually don’t have one of these products to test it.

I will look out around my typical haunts to see if I can pick someone up for low priced. If leapfrog ended up being performing personalization with a talked name, it’s likely that they had a database of pre-recorded brands, unless these were utilizing text-to-speech for every single one. If that’s the case, it is possible that the leapfrog connect software is venturing out and seeking for that database or maybe for the certain entry for title you offered it , and cannot think it is any longer.

As it can’t fetch the audio file with all the name, that the main flash memory won’t get filled in, and you will hear static rather.

If you possibly could figure out in which the name audio will be saved, it should be possible to either write a script to overwrite it, or to trick leapfrog connect into composing it for you personally. Leapfrog has many of their own protocols for manipulating these devices via a USB mass storage tunnel, however it doesn’t involve the utilization of the standard filesystem to take action.

You will likely need to connect to these devices at a lower life expectancy amount than that in the event that you wish to replace the items associated with the flash. It is using prerecorded brands from a database, as the preview backlinks for each name open up an mp3 associated with name, plus they nevertheless work.

One other thing is that the Connect software is fighting myself each step of the means here. Then your name choice display just shows when per installation; when I choose a title and synch once, title selection display breaks until I uninstall and reinstall the Connect software.

This will make troubleshooting a giant pain of a procedure. Any more recommendations how i may begin intercepting the name sound request and providing my very own file?

What you would like doing is determine what the host is sending into the device and where in fact the audio file sits. Unless is in reality delivering the total firmware, it willn’t be too awfully hard to decode what exactly is going over the cable – I would are expecting the name, the audio file, and possibly a couple of other stuff.

When you figure that out, you’re able to write your program that sends the appropriate data – i. The learning curve to this things may be a little high, but it is completely doable offered time and energy.

Good-luck! Like I mentioned earlier, if I happen to see one of these simple for sale inexpensively I’ll pick it and attempt to help. The procedure is only a little involved, therefore I’m focusing on cleansing it to a point where I can share it.

I can not make any claims on a schedule nonetheless it should always be ready soon-ish. Are you mostly a Windows user, or do you have quick access to a Linux system? I will be able to adjust the things I ended up being performing to Windows without a huge amount of work if necessary. I am definitely a Windows-first guy, so that would be my choice.

I could spin up a Linux VM if required, but I’m uncertain in case the method is virtualization-friendly, and anyway I’d need much, more detailed tips on Linux.

Let me know how it goes – the python piece should work with either windows or linux; the audio format conversion must be done on Windows. Note: Currently the name must be under 8 figures, and the sound file must be really small like significantly less than 3kb. Traceback newest call last : File “nametweaker. Thanks again man, I finally returned to checking this bond and noticed you uploaded this. However I keep getting the issue where the after changing title and spinning it to your leaptop it just locks up when it attempts to use the name file the writing name does modification, however.

Hey, I tried this on a Linux box and mayn’t have the noise file to focus. However ran AudioBatchConverter. Both lead to the system locking up once it attempted to have fun with the file. There’s some header information both in data that don’t seem to be represented within the firmware location, therefore perhaps some information removal is essential.

I happened to be able to write the initial file into the device to have it working again, though, to make certain that component is good at the very least. I am going to keep poking at it. This means we are trapped with AudioBatchConverter for now – though the algorithm is in a separate DLL, so theoretically it’s possible to either reverse engineer the algo or even to simply operate the DLL as a binary blob to encode the information.

I think it is also really helps to trim the silence off the end for the file and work out it because brief as you are able to. It has a k SPI flash chip from the back where most of the custom text and sound data is kept, including the custom name, and custom “emails”. I am not sure exactly which part number it really is in the GPLB6x family members, but GeneralPlus even has a picture of this my own leaptop product next to this section :.

I had a while to try out with this particular a bit tonight, i’ve a harsh version of something which should work better – the newest one auto-downloads the format converter and does most of the conversion in-house – it ought to be in a position to convert mp3 data, too! The signal is reside in the github now therefore you should just need to grab modern variation.

You will need to get pydub sudo pip3 install pydub , and wine sudo apt install wine-stable to make this work. If it generally does not work, is it possible to send me a copy associated with back-up ROM picture that the application produces, and also the soundfile you’re wanting to use? Which will help me a lot in trying to reproduce the issue. I attempted a couple of different audio recordings, wav and mp3, plus it worked ok, so I want to determine if I’m making some assumption which is only true for my specific unit.

Use of this site comprises acceptance of our User Agreement and online privacy policy. All legal rights reserved. OpenLF responses. Like to join? Sign in or subscribe in seconds. Send a brand-new link. Publish a brand-new text post. Get an ad-free experience with unique advantages, and directly help Reddit. OpenLF join leave 60 readers 3 users here now elinux. Welcome to Reddit, the front web page of the web. Become a Redditor and join one of tens and thousands of communities.

Like to enhance the conversation? Article a comment! Create a free account. Looking forward to seeing what you’ve produce. The example seems perfect! Utilizing audacity, slice the file down really brief, transcode to khz, and export as WAV. If it does not work, it’s possible to flash your old ROM back on with nametweaker, or open Leapfrog Connect and let it restore the unit this way.

I can not find any technical specs after all. Here is the example syntax: python3 changename.

KLS Backup pro 5.2.2.0: backing up data
nineteen.04.2021 [17:51],
Sergey and Marina Bondarenko

A brand-new form of KLS Backup pro has been made available, designed to develop backups and synchronize information. Information could be saved on regional and system drives, on CD / DVD, and on an FTP server. The unique options that come with this program include producing backups in ZIP, 7-ZIP or SQX platforms, also burning registry keys, synchronizing the items of two different folders. Making use of the abilities associated with program, any back-up are quickly discovered and restored.

The newest variation adds formal support for Windows Server 2021 R2 and Windows Small Business Server 2021, added the ability to bypass Windows disk cache for large files, fixed pests.

Developer: KLS Smooth
Circulation: shareware, $ 59.95.
Operating System: Windows All
Size 7.71 MB
You can easily install from here

Associated materials:

  • Free backup pc software;
  • Programs for accelerating access to data and folders.

an origin:

  • kls-soft.com